Pressure
Flow
Length
Area

Display only. Every formula on this site works in its own canonical unit, and the conversion happens where the number is written. The choice lives in this browser and in the address, with no account.

TOOLS

tmp maglev pumps

31 models in this family, 498 published parameters, each carrying the source key and the page it was read on.

Back to the selector, which answers across all 333 models and 14 families.

TMP-3403 3300 l/s N2 speed, down to 1.0e-9 mbar ptb-shimadzu-tmp-3203-3403 +19 parameters

Shimadzu, tmp maglev. Lifecycle: active.

ambient temp range Operation : 0 to 40 °C / Storage : -25 to 70 °C °C ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

bake temp max 120 °C ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

bearing type magnetic (radial + axial active maglev), touchdown backup bearings ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

compression h2 6 × 104 ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

compression he 1 × 105 ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

compression n2 1 × 109 ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

cooling water ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

inlet flange VG350 (Note 4) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

lubricant none (dry, oil-free touchdown bearings) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

magnetic field max Radial 3 mT / Axial 15 mT mT ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

mass 70 kg ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

mounting orientation In any desired direction (Note 3) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

pumping speed h2 2400 l/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

pumping speed he 3100 l/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

pumping speed n2 3300 l/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28. Served to the builder as 3300 l/s. Export rule: published nitrogen pumping speed.

rotation speed 22020 rpm ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

service interval Annual overhaul is recommended ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 53.

startup time 15 minutes min ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

ultimate pressure 10-7 Pa order Pa ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 28.

TMP-3203 3200 l/s N2 speed, down to 1.0e-11 mbar ptb-shimadzu-tmp-3203-3403 +19 parameters

Shimadzu, tmp maglev. Lifecycle: active.

ambient temp range Operation : 0 to 40 °C / Storage : -25 to 70 °C °C ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

bake temp max 120 °C ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

bearing type magnetic (radial + axial active maglev), touchdown backup bearings ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

compression h2 1 × 104 ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

compression he 3 × 105 ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

compression n2 1 × 109 or more ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

cooling air (cooling fan) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

inlet flange VG350 (Note 5) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

lubricant none (dry, oil-free touchdown bearings) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 23.

magnetic field max Radial 3 mT / Axial 15 mT mT ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

mass 70 kg ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

mounting orientation In any desired direction (Note 4) ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

pumping speed h2 2400 l/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

pumping speed he 3000 l/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

pumping speed n2 3200 l/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27. Served to the builder as 3200 l/s. Export rule: published nitrogen pumping speed.

rotation speed 21000 rpm ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

service interval Annual overhaul is recommended ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 53.

startup time 13 minutes min ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

ultimate pressure 10-9 Pa order Pa ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403 p. 27.

TMP-3203LM 3200 l/s N2 speed ptb-shimadzu-tmp-3203-3403 +1 parameter

Shimadzu, tmp maglev. Lifecycle: active.

pumping speed n2 3200 L/s ptb-shimadzu-tmp-3203-3403

Read on ptb-shimadzu-tmp-3203-3403. Served to the builder as 3200 l/s. Export rule: published nitrogen pumping speed.

STP-A3003 3000 l/s N2 speed, down to 1.0e-8 mbar t2-stp-a2503-a3003 +19 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bake temp max <120 °C t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bearing type magnetic t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 9.

compression h2 6×10^3 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

compression n2 >10^8 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

cooling Water cooling t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

inlet flange VG300/VG350/ISO320F t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

lubricant Not necessary t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mass 72 kg t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max foreline pressure 333 (2.5) t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max gas throughput n2 3.0 (1800) t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mounting orientation Free t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

noise level <50 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed h2 1800 l/s t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed n2 3000 l/s t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8. Served to the builder as 3000 l/s. Export rule: published nitrogen pumping speed.

purge flange KF10 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 13.

rotation speed 27000 rpm t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

startup time 9 min t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

ultimate pressure restated in a second unit, 1.333x apart 10^-6 Pa (10^-8 Torr) t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

STP-A2503 2500 l/s N2 speed, down to 1.0e-8 mbar t2-stp-a2503-a3003 +19 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bake temp max <120 °C t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

bearing type magnetic t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 9.

compression h2 6×10^3 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

compression n2 >10^8 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

cooling Water cooling t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

inlet flange VG250/ISO250F/ICF305 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

lubricant Not necessary t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mass 72 kg t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max foreline pressure 333 (2.5) t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

max gas throughput n2 3.0 (1800) t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

mounting orientation Free t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

noise level <50 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed h2 1600 l/s t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

pumping speed n2 2500 l/s t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8. Served to the builder as 2500 l/s. Export rule: published nitrogen pumping speed.

purge flange KF10 t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 13.

rotation speed 27000 rpm t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

startup time 9 min t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

ultimate pressure restated in a second unit, 1.333x apart 10^-6 Pa (10^-8 Torr) t2-stp-a2503-a3003

Read on t2-stp-a2503-a3003 p. 8.

STP-F2203C 2200 l/s N2 speed, down to 1.0e-8 mbar ptb-edwards-stp-f2203c +15 parameters

Edwards, tmp maglev. Lifecycle: active.

ambient temp range 0 to 40 °C ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

bake temp max < 120 °C ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

bearing type magnetic bearing ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

cooling Water cooling ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

lubricant Not necessary ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

mass 61 kg ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

max foreline pressure 500 Pa ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

mounting orientation Free ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

noise level <50 dB ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

pumping speed h2 1200 L/s ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

pumping speed n2 2200 L/s ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8. Served to the builder as 2200 l/s. Export rule: published nitrogen pumping speed.

purge gas required 3.4×10-2 to 8.4×10-2 Pa·m3/s ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

rotation speed 27000 rpm ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

startup time 7 min ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

ultimate pressure 10-6 Pa ptb-edwards-stp-f2203c

Read on ptb-edwards-stp-f2203c p. 8.

STP-A2203 2200 l/s N2 speed t2-stp-a2203 +21 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp-a2203

Read on t2-stp-a2203 p. 107.

bake temp max <120 °C t2-stp-a2203

Read on t2-stp-a2203 p. 107.

bearing type magnetic bearings with solid-lubricated touch-down (backup) bearings t2-stp-a2203

Read on t2-stp-a2203 p. 21.

compression h2 2.5×10^4 ratio t2-stp-a2203

Read on t2-stp-a2203 p. 107.

compression n2 >10^8 ratio t2-stp-a2203

Read on t2-stp-a2203 p. 107.

cooling Water cooling t2-stp-a2203

Read on t2-stp-a2203 p. 107.

inlet flange VG250/ISO250F/ICF305 t2-stp-a2203

Read on t2-stp-a2203 p. 107.

lubricant Not necessary t2-stp-a2203

Read on t2-stp-a2203 p. 107.

magnetic field max 15 mT t2-stp-a2203

Read on t2-stp-a2203 p. 27.

mass 61 kg t2-stp-a2203

Read on t2-stp-a2203 p. 107.

max foreline pressure 400 (3) Pa (Torr) t2-stp-a2203

Read on t2-stp-a2203 p. 107.

max gas throughput n2 2.5 (1500) Pa・m3/s (SCCM) t2-stp-a2203

Read on t2-stp-a2203 p. 107.

mounting orientation Free t2-stp-a2203

Read on t2-stp-a2203 p. 107.

noise level <50 dB t2-stp-a2203

Read on t2-stp-a2203 p. 107.

pumping speed h2 1700 L/s t2-stp-a2203

Read on t2-stp-a2203 p. 107.

pumping speed n2 2200 L/s t2-stp-a2203

Read on t2-stp-a2203 p. 107. Served to the builder as 2200 l/s. Export rule: published nitrogen pumping speed.

purge flange KF10 t2-stp-a2203

Read on t2-stp-a2203 p. 24.

rotation speed 27,000 rpm t2-stp-a2203

Read on t2-stp-a2203 p. 107.

service interval three to six months t2-stp-a2203

Read on t2-stp-a2203 p. 102.

startup time 7 min t2-stp-a2203

Read on t2-stp-a2203 p. 107.

ultimate pressure 10-６(10-８) order (after baking) Pa (Torr) t2-stp-a2203

Read on t2-stp-a2203 p. 107.

STP-iXA2205 2200 l/s N2 speed, down to 1.0e-9 mbar ptb-seiko-seiki-stp-ixa2205 +17 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: active.

ambient temp range 0 to 40 °C ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

bake temp max < 120 °C ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

bearing type magnetic bearing, 5 pairs of active magnetic bearings ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 19.

compression h2 1×104 ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

cooling Water cooling ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

inlet flange ISO250F/VG250/ICF305 ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

lubricant Not necessary ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

mass 61 kg ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

max foreline pressure 266 Pa ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

mounting orientation Free ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

noise level <55 dB ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

pumping speed h2 1700 L/s ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

pumping speed n2 2200 L/s ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23. Served to the builder as 2200 l/s. Export rule: published nitrogen pumping speed.

purge gas required 8.4×10-2 Pa·m3/s ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

rotation speed 27000 rpm ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

startup time ≤8 min ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

ultimate pressure 10-7 Pa ptb-seiko-seiki-stp-ixa2205

Read on ptb-seiko-seiki-stp-ixa2205 p. 23.

TURBOVAC MAG W 2000 1650 l/s N2 speed, down to 2.0e-10 mbar t2-mag-w2000 +14 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 to 40 °C t2-mag-w2000

Read on t2-mag-w2000 p. 7.

bake temp max 100 °C t2-mag-w2000

Read on t2-mag-w2000 p. 7.

bearing type magnetic t2-mag-w2000

Read on t2-mag-w2000 p. 1.

compression h2 9.6 × 10^3 t2-mag-w2000

Read on t2-mag-w2000 p. 7.

compression n2 3.8 × 10^8 t2-mag-w2000

Read on t2-mag-w2000 p. 7.

cooling water t2-mag-w2000

Read on t2-mag-w2000 p. 7.

foreline flange DN 40 KF t2-mag-w2000

Read on t2-mag-w2000 p. 7.

inlet flange DN 250 CF t2-mag-w2000

Read on t2-mag-w2000 p. 7.

mass 72 kg t2-mag-w2000

Read on t2-mag-w2000 p. 7.

max foreline pressure 1 mbar t2-mag-w2000

Read on t2-mag-w2000 p. 7.

pumping speed n2 1650 l/s t2-mag-w2000

Read on t2-mag-w2000 p. 7. Served to the builder as 1650 l/s. Export rule: published nitrogen pumping speed.

rotation speed 28800 min-1 t2-mag-w2000

Read on t2-mag-w2000 p. 7.

startup time < 8 min t2-mag-w2000

Read on t2-mag-w2000 p. 7.

ultimate pressure 2 × 10^-10 mbar t2-mag-w2000

Read on t2-mag-w2000 p. 7.

TURBOVAC MAG W 2010 C 1650 l/s N2 speed, down to 1.0e-8 mbar t2-mag-w2010c +15 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 to 40 °C t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

bearing type magnetic t2-mag-w2010c

Read on t2-mag-w2010c p. 3.

compression n2 >10^8 t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

cooling water t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

inlet flange DN 250 ISO-F t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

lubricant none (magnetic bearing, no grease) t2-mag-w2010c

Read on t2-mag-w2010c p. 3.

magnetic field max 5 mT t2-mag-w2010c

Read on t2-mag-w2010c p. 12.

mass approx. 65 kg t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

max foreline pressure 3.3 mbar t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

mounting orientation any t2-mag-w2010c

Read on t2-mag-w2010c p. 3.

pumping speed n2 1650 l/s t2-mag-w2010c

Read on t2-mag-w2010c p. 6. Served to the builder as 1650 l/s. Export rule: published nitrogen pumping speed.

purge flange VCR Nut 1/4" t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

rotation speed 28800 min-1 t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

startup time <10 min t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

ultimate pressure stated as a bound <10^-8 mbar t2-mag-w2010c

Read on t2-mag-w2010c p. 6.

TURBOVAC MAG W 2010 CT 1650 l/s N2 speed, down to 1.0e-8 mbar t2-mag-w2010cht +20 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 to 40 °C t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

bearing type magnetic t2-mag-w2010cht

Read on t2-mag-w2010cht p. 32.

compression n2 > 10^8 t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

cooling water t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

foreline flange DN 40 KF t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

inlet flange DN 250 ISO-F t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

lubricant no grease t2-mag-w2010cht

Read on t2-mag-w2010cht p. 4.

magnetic field max ≤ 5 mT t2-mag-w2010cht

Read on t2-mag-w2010cht p. 14.

mass 65 kg t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

max foreline pressure 3.5 mbar t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

max foreline pressure ar 4.3 mbar t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

max gas throughput ar 1300 sccm t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

mounting orientation any t2-mag-w2010cht

Read on t2-mag-w2010cht p. 4.

noise level < 70 dB(A) t2-mag-w2010cht

Read on t2-mag-w2010cht p. 14.

pumping speed n2 1650 l/s t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6. Served to the builder as 1650 l/s. Export rule: published nitrogen pumping speed.

purge flange VCR Nut 1/4" t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

rotation speed 28800 min-1 t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

service interval nearly maintenance-free t2-mag-w2010cht

Read on t2-mag-w2010cht p. 46.

startup time < 8 min t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

ultimate pressure stated as a bound < 10^-8 mbar t2-mag-w2010cht

Read on t2-mag-w2010cht p. 6.

STP-A1603C 1600 l/s N2 speed, down to 1.0e-9 mbar ptb-edwards-stpa1603c +18 parameters

Edwards, tmp maglev. Lifecycle: active.

ambient temp range 0 to 40 °C ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

bake temp max < 120 °C ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

bearing type magnetic bearing ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 8.

compression h2 7×103 ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

cooling Water cooling ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

inlet flange ISO200F/VG200/ICF253 ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

lubricant Not necessary ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

mass 35 kg ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

max foreline pressure 266 Pa ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

max gas throughput n2 4.2 Pa·m3/s ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

mounting orientation Free ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

noise level <50 dB ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

pumping speed h2 1200 L/s ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

pumping speed n2 1600 L/s ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7. Served to the builder as 1600 l/s. Export rule: published nitrogen pumping speed.

purge gas required 3.4×10-2 to 8.4×10-2 Pa·m3/s ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

rotation speed 36500 rpm ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

startup time 7 min ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

ultimate pressure 10-7 Pa ptb-edwards-stpa1603c

Read on ptb-edwards-stpa1603c p. 7.

TURBOVAC MAG 2000 1550 l/s N2 speed, down to 1.0e-8 mbar t2-mag1600-2000 +16 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 to 40 °C t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

bearing type magnetic t2-mag1600-2000

Read on t2-mag1600-2000 p. 41.

compression n2 > 10^8 t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

cooling water t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

foreline flange DN 40 KF t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

inlet flange DN 250 ISO-F t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

lubricant no grease t2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

mass 68 kg t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

max foreline pressure 1.5 mbar t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

mounting orientation any t2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

noise level < 70 dB(A) t2-mag1600-2000

Read on t2-mag1600-2000 p. 23.

pumping speed n2 1550 l/s t2-mag1600-2000

Read on t2-mag1600-2000 p. 9. Served to the builder as 1550 l/s. Export rule: published nitrogen pumping speed.

rotation speed 28800 min-1 t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

service interval maintenance-free t2-mag1600-2000

Read on t2-mag1600-2000 p. 62.

startup time < 10 min t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

ultimate pressure stated as a bound < 10^-8 mbar t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

STP-H1303 1300 l/s N2 speed, down to 1.0e-9 mbar ptb-seiko-seiki-stp-h803-1303 +14 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: legacy in service.

ambient temp range 0 to 40 °C ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

bake temp max < 120 °C ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

cooling Water cooling ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

inlet flange VG200/ISO200 ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

lubricant Not necessary ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mass 39 kg ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

max foreline pressure 270 Pa ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mounting orientation Free ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

noise level <50 dB ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed h2 1000 L/s ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed n2 1300 L/s ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106. Served to the builder as 1300 l/s. Export rule: published nitrogen pumping speed.

rotation speed 32500 rpm ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

startup time 7 min ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

ultimate pressure 10-7 Pa ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

TMP-1303 1300 l/s N2 speed, down to 1.0e-10 mbar ptb-shimadzu-tmp-803-1303 +18 parameters

Shimadzu, tmp maglev. Lifecycle: active.

bake temp max 120 °C ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

bearing type magnetic (radial + axial active maglev), touchdown backup bearings ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

compression h2 1 × 103 ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

compression he 1 × 104 ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

compression n2 6 × 108 ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

cooling air (cooling fan) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

inlet flange ICF253 (Note 4) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

lubricant none (dry, oil-free touchdown bearings) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

magnetic field max Radial 3 mT / Axial 15 mT mT ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

mass 34 kg ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

mounting orientation In any desired direction (Note 3) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

pumping speed h2 750 l/s ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

pumping speed he 1050 l/s ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

pumping speed n2 1300 l/s ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36. Served to the builder as 1300 l/s. Export rule: published nitrogen pumping speed.

rotation speed 30300 rpm ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

service interval Annual overhaul is recommended ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 59.

startup time 7 minutes or less min ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

ultimate pressure 10-8 Pa order Pa ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 36.

TURBOVAC MAG 1600 1250 l/s N2 speed, down to 1.0e-8 mbar t2-mag1600-2000 +16 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 to 40 °C t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

bearing type magnetic t2-mag1600-2000

Read on t2-mag1600-2000 p. 41.

compression n2 > 10^8 t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

cooling water t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

foreline flange DN 40 KF t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

inlet flange DN 200 ISO-F t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

lubricant no grease t2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

mass 70 kg t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

max foreline pressure 1.5 mbar t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

mounting orientation any t2-mag1600-2000

Read on t2-mag1600-2000 p. 4.

noise level < 70 dB(A) t2-mag1600-2000

Read on t2-mag1600-2000 p. 23.

pumping speed n2 1250 l/s t2-mag1600-2000

Read on t2-mag1600-2000 p. 9. Served to the builder as 1250 l/s. Export rule: published nitrogen pumping speed.

rotation speed 28800 min-1 t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

service interval maintenance-free t2-mag1600-2000

Read on t2-mag1600-2000 p. 62.

startup time < 10 min t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

ultimate pressure stated as a bound < 10^-8 mbar t2-mag1600-2000

Read on t2-mag1600-2000 p. 9.

MAG 1500 C/CT DN 200 1100 l/s N2 speed, down to 1.0e-8 mbar t2-magdigital +15 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 to 40 °C t2-magdigital

Read on t2-magdigital p. 10.

bake temp max 120 °C t2-magdigital

Read on t2-magdigital p. 10.

bearing type magnetic bearing t2-magdigital

Read on t2-magdigital p. 1.

cooling water t2-magdigital

Read on t2-magdigital p. 10.

inlet flange 200 ISO-F t2-magdigital

Read on t2-magdigital p. 11.

lubricant none (magnetic bearing, no grease) t2-magdigital

Read on t2-magdigital p. 6.

mass 32 kg t2-magdigital

Read on t2-magdigital p. 10.

max foreline pressure 1.7 mbar t2-magdigital

Read on t2-magdigital p. 11.

mounting orientation any t2-magdigital

Read on t2-magdigital p. 6.

noise level < 70 dB(A) t2-magdigital

Read on t2-magdigital p. 24.

pumping speed h2 920 l/s t2-magdigital

Read on t2-magdigital p. 11.

pumping speed n2 1100 l/s t2-magdigital

Read on t2-magdigital p. 11. Served to the builder as 1100 l/s. Export rule: published nitrogen pumping speed.

rotation speed 36000 min-1 t2-magdigital

Read on t2-magdigital p. 11.

startup time < 6 min t2-magdigital

Read on t2-magdigital p. 11.

ultimate pressure stated as a bound < 10-8 mbar t2-magdigital

Read on t2-magdigital p. 11.

STP-1003 1000 l/s N2 speed, down to 1.0e-10 mbar t2-stp-603-1003 +18 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bake temp max <120 °C t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bearing type magnetic t2-stp-603-1003

Read on t2-stp-603-1003 p. 22.

compression h2 10^5 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

compression n2 10^8 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

cooling Natural air cooling (Water cooling, Air cooling: At baking and gas pumping) t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

inlet flange ICF253/VG200/ISO200 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

lubricant Not necessary t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

magnetic field max 15 mT (150 G) axial, 3 mT (30 G) radial t2-stp-603-1003

Read on t2-stp-603-1003 p. 28.

mass 31 kg t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

max foreline pressure 13 (0.1) t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

mounting orientation Free t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

noise level <50 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed h2 800 l/s t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed n2 1000 l/s t2-stp-603-1003

Read on t2-stp-603-1003 p. 107. Served to the builder as 1000 l/s. Export rule: published nitrogen pumping speed.

rotation speed 35000 rpm t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

startup time 6 min t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

ultimate pressure restated in a second unit, 1.333x apart 10^-8 Pa (10^-10 Torr) t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

STP-H803 800 l/s N2 speed, down to 1.0e-9 mbar ptb-seiko-seiki-stp-h803-1303 +14 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: legacy in service.

ambient temp range 0 to 40 °C ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

bake temp max < 120 °C ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

cooling Water cooling ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

inlet flange VG150/ISO160 ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

lubricant Not necessary ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mass 39 kg ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

max foreline pressure 270 Pa ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

mounting orientation Free ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

noise level <50 dB ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed h2 600 L/s ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

pumping speed n2 800 L/s ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106. Served to the builder as 800 l/s. Export rule: published nitrogen pumping speed.

rotation speed 32500 rpm ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

startup time 7 min ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

ultimate pressure 10-7 Pa ptb-seiko-seiki-stp-h803-1303

Read on ptb-seiko-seiki-stp-h803-1303 p. 106.

TMP-803 800 l/s N2 speed, down to 1.0e-11 mbar ptb-shimadzu-tmp-803-1303 +18 parameters

Shimadzu, tmp maglev. Lifecycle: active.

bake temp max 120 °C ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

bearing type magnetic (radial + axial active maglev), touchdown backup bearings ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

compression h2 4 × 103 ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

compression he 8 × 104 ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

compression n2 1 × 109 or more ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

cooling air (cooling fan) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

inlet flange ICF203 (Note 4) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

lubricant none (dry, oil-free touchdown bearings) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 29.

magnetic field max Radial 3 mT / Axial 15 mT mT ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

mass 32 kg or less kg ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

mounting orientation In any desired direction (Note 3) ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

pumping speed h2 700 l/s ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

pumping speed he 800 l/s ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

pumping speed n2 800 l/s ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33. Served to the builder as 800 l/s. Export rule: published nitrogen pumping speed.

rotation speed 35000 rpm ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

service interval Annual overhaul is recommended ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 59.

startup time 5 minutes or less min ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

ultimate pressure 10-9 Pa order Pa ptb-shimadzu-tmp-803-1303

Read on ptb-shimadzu-tmp-803-1303 p. 33.

MAG W 830 C 700 l/s N2 speed, down to 1.0e-8 mbar t2-magdigital05141 +17 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range 5 – 40 °C t2-magdigital05141

Read on t2-magdigital05141 p. 15.

bearing type 5-axes controlled magnetic bearing t2-magdigital05141

Read on t2-magdigital05141 p. 10.

compression n2 > 5·10^7 ratio t2-magdigital05141

Read on t2-magdigital05141 p. 15.

cooling water type t2-magdigital05141

Read on t2-magdigital05141 p. 15.

inlet flange DN 160 ISO-F flange t2-magdigital05141

Read on t2-magdigital05141 p. 15.

lubricant none (grease-free magnetic bearing) t2-magdigital05141

Read on t2-magdigital05141 p. 10.

magnetic field max 5 mT t2-magdigital05141

Read on t2-magdigital05141 p. 44.

mass 32 kg t2-magdigital05141

Read on t2-magdigital05141 p. 15.

max foreline pressure 2 mbar t2-magdigital05141

Read on t2-magdigital05141 p. 15.

mounting orientation any t2-magdigital05141

Read on t2-magdigital05141 p. 10.

noise level < 70 dB(A) t2-magdigital05141

Read on t2-magdigital05141 p. 44.

pumping speed h2 300 l/s t2-magdigital05141

Read on t2-magdigital05141 p. 15.

pumping speed n2 700 l/s t2-magdigital05141

Read on t2-magdigital05141 p. 15. Served to the builder as 700 l/s. Export rule: published nitrogen pumping speed.

purge flange DN 10/16 flange t2-magdigital05141

Read on t2-magdigital05141 p. 22.

rotation speed 24000 min-1 t2-magdigital05141

Read on t2-magdigital05141 p. 15.

startup time < 4 min t2-magdigital05141

Read on t2-magdigital05141 p. 15.

ultimate pressure stated as a bound < 10^-8 mbar t2-magdigital05141

Read on t2-magdigital05141 p. 15.

STP-603 650 l/s N2 speed, down to 1.0e-10 mbar t2-stp-603-1003 +18 parameters

Seiko Instruments Inc., tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bake temp max <120 °C t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

bearing type magnetic t2-stp-603-1003

Read on t2-stp-603-1003 p. 22.

compression h2 10^5 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

compression n2 10^8 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

cooling Natural air cooling (Water cooling, Air cooling: At baking and gas pumping) t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

inlet flange ICF203/VG150/ISO160 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

lubricant Not necessary t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

magnetic field max 15 mT (150 G) axial, 3 mT (30 G) radial t2-stp-603-1003

Read on t2-stp-603-1003 p. 28.

mass 31 kg t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

max foreline pressure 13 (0.1) t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

mounting orientation Free t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

noise level <50 t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed h2 550 l/s t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

pumping speed n2 650 l/s t2-stp-603-1003

Read on t2-stp-603-1003 p. 107. Served to the builder as 650 l/s. Export rule: published nitrogen pumping speed.

rotation speed 35000 rpm t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

startup time 6 min t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

ultimate pressure restated in a second unit, 1.333x apart 10^-8 Pa (10^-10 Torr) t2-stp-603-1003

Read on t2-stp-603-1003 p. 107.

STP-451 480 l/s N2 speed, down to 1.0e-10 mbar t2-stp301-451 +20 parameters

Edwards, tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp301-451

Read on t2-stp301-451 p. 112.

bake temp max <120 °C t2-stp301-451

Read on t2-stp301-451 p. 112.

bearing type magnetic t2-stp301-451

Read on t2-stp301-451 p. 20.

compression h2 2 x 10^4 t2-stp301-451

Read on t2-stp301-451 p. 112.

compression he 5 x 10^5 t2-stp301-451

Read on t2-stp301-451 p. 112.

compression n2 10^8 t2-stp301-451

Read on t2-stp301-451 p. 112.

cooling Natural air cooling (Water/air cooling: for baking/gas suction) t2-stp301-451

Read on t2-stp301-451 p. 112.

inlet flange ICF203/VG150/ISO16 t2-stp301-451

Read on t2-stp301-451 p. 112.

lubricant Not necessary t2-stp301-451

Read on t2-stp301-451 p. 112.

magnetic field max 15 mT (150 G) axial, 3 mT (30 G) radial t2-stp301-451

Read on t2-stp301-451 p. 25.

mass 12 kg t2-stp301-451

Read on t2-stp301-451 p. 112.

max foreline pressure 13 Pa (0.1 Torr) t2-stp301-451

Read on t2-stp301-451 p. 112.

mounting orientation Free t2-stp301-451

Read on t2-stp301-451 p. 112.

noise level <50 dB t2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed h2 460 l/s t2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed he 460 l/s t2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed n2 480 l/s t2-stp301-451

Read on t2-stp301-451 p. 112. Served to the builder as 480 l/s. Export rule: published nitrogen pumping speed.

rotation speed 25,000 to 48,000 rpm t2-stp301-451

Read on t2-stp301-451 p. 112.

startup time 3 min t2-stp301-451

Read on t2-stp301-451 p. 112.

ultimate pressure restated in a second unit, 1.333x apart 10^-8 Pa (10^-10 Torr) t2-stp301-451

Read on t2-stp301-451 p. 112.

TMP-403 420 l/s N2 speed, down to 1.0e-10 mbar ptb-shimadzu-tmp-403 +19 parameters

Shimadzu, tmp maglev. Lifecycle: active.

ambient temp range Operation : 10 to 40 °C / Storage : -25 to 70 °C °C ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

bake temp max 120 °C ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

bearing type magnetic (radial + axial active maglev), touchdown backup bearings ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 27.

compression h2 1 × 104 ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

compression he 8 × 104 ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

compression n2 1 × 109 ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

cooling air (cooling fan) ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

inlet flange ICF203 (Note 6) ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

lubricant none (dry, oil-free touchdown bearings) ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 27.

magnetic field max Radial 3 mT / Axial 15 mT mT ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

mass 14 kg ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

mounting orientation In any desired direction (Note 7) ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

pumping speed h2 340 l/s ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

pumping speed he 360 l/s ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

pumping speed n2 420 l/s ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33. Served to the builder as 420 l/s. Export rule: published nitrogen pumping speed.

rotation speed 45000 rpm ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

service interval Annual overhaul is recommended ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 55.

startup time 5 minutes or less min ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

ultimate pressure 10-8 Pa order Pa ptb-shimadzu-tmp-403

Read on ptb-shimadzu-tmp-403 p. 33.

STP-301 300 l/s N2 speed, down to 1.0e-10 mbar t2-stp301-451 +20 parameters

Edwards, tmp maglev. Lifecycle: eol supported.

ambient temp range 0 to 40 °C t2-stp301-451

Read on t2-stp301-451 p. 112.

bake temp max <120 °C t2-stp301-451

Read on t2-stp301-451 p. 112.

bearing type magnetic t2-stp301-451

Read on t2-stp301-451 p. 20.

compression h2 2 x 10^4 t2-stp301-451

Read on t2-stp301-451 p. 112.

compression he 5 x 10^5 t2-stp301-451

Read on t2-stp301-451 p. 112.

compression n2 10^8 t2-stp301-451

Read on t2-stp301-451 p. 112.

cooling Natural air cooling (Water/air cooling: for baking/gas suction) t2-stp301-451

Read on t2-stp301-451 p. 112.

inlet flange ICF152/VG100/ISO10 t2-stp301-451

Read on t2-stp301-451 p. 112.

lubricant Not necessary t2-stp301-451

Read on t2-stp301-451 p. 112.

magnetic field max 15 mT (150 G) axial, 3 mT (30 G) radial t2-stp301-451

Read on t2-stp301-451 p. 25.

mass 11 kg t2-stp301-451

Read on t2-stp301-451 p. 112.

max foreline pressure 13 Pa (0.1 Torr) t2-stp301-451

Read on t2-stp301-451 p. 112.

mounting orientation Free t2-stp301-451

Read on t2-stp301-451 p. 112.

noise level <50 dB t2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed h2 300 l/s t2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed he 280 l/s t2-stp301-451

Read on t2-stp301-451 p. 112.

pumping speed n2 300 l/s t2-stp301-451

Read on t2-stp301-451 p. 112. Served to the builder as 300 l/s. Export rule: published nitrogen pumping speed.

rotation speed 25,000 to 48,000 rpm t2-stp301-451

Read on t2-stp301-451 p. 112.

startup time 3 min t2-stp301-451

Read on t2-stp301-451 p. 112.

ultimate pressure restated in a second unit, 1.333x apart 10^-8 Pa (10^-10 Torr) t2-stp301-451

Read on t2-stp301-451 p. 112.

STP-iX455 300 l/s N2 speed, down to 1.0e-10 mbar ptb-edwards-stp-ix455 +17 parameters

Edwards, tmp maglev. Lifecycle: active.

ambient temp range 0 to 40 °C ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

bake temp max < 120 °C ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

bearing type 5 axis free-controlled magnetic bearing ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

compression h2 1×104 ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

cooling Natural air cooling ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

input current max 5 A ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 128.

lubricant Not necessary ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

magnetic field max ≦100 mGauss ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

mass 16 kg ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

max foreline pressure 67 Pa ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

mounting orientation Free ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

noise level <50 dB ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

pumping speed h2 300 L/s ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

pumping speed n2 300 L/s ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127. Served to the builder as 300 l/s. Export rule: published nitrogen pumping speed.

rotation speed 55000 rpm ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

startup time ≦6 min ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

ultimate pressure 10-8 Pa ptb-edwards-stp-ix455

Read on ptb-edwards-stp-ix455 p. 127.

TURBOVAC MAG W 300 iP 300 l/s N2 speed tf-leybold-mag-w-300-manual +1 parameter

Leybold, tmp maglev. Lifecycle: active.

pumping speed n2 300 l · s-1 tf-leybold-mag-w-300-manual

Read on tf-leybold-mag-w-300-manual p. section 1.3 Technical data (colonnes MAG W 300 P/iP). Served to the builder as 300 l/s. Export rule: published nitrogen pumping speed.

TURBOVAC 340 M 270 l/s N2 speed, down to 1.0e-10 mbar ptb-leybold-turbovac340 +19 parameters

Leybold, tmp maglev. Lifecycle: legacy in service.

ambient temp range up to 45 °C ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 10.

compression h2 2.5·10^3 ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

compression he 6.4·10^4 ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

compression n2 > 10^9 ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

cooling not required ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

inlet flange DN 100 ISO-K ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

mass 16 kg ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

max foreline pressure 5·10^-1 mbar ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

mounting orientation any ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

noise level < 70 dB(A) ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 10.

pumping speed h2 340 l/s ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

pumping speed he 370 l/s ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

pumping speed n2 270 l/s ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7. Served to the builder as 270 l/s. Export rule: published nitrogen pumping speed.

purge flange DN 10 KF ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

rotation speed 51600 min-1 ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

service interval not_applicable ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 25.

startup time 3.5 min ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

ultimate pressure stated as a bound < 10^-10 mbar ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

venting flange DN 10 KF ptb-leybold-turbovac340

Read on ptb-leybold-turbovac340 p. 7.

EXT250M 240 l/s N2 speed, down to 5.0e-9 mbar t2-ext250m +23 parameters

Edwards, tmp maglev. Lifecycle: eol supported.

ambient temp range 0 - 35 C C t2-ext250m

Read on t2-ext250m p. 15.

bake temp max 100 C t2-ext250m

Read on t2-ext250m p. 12.

bearing type frictionless passive magnetic bearings (radial, both shaft ends) + active electromagnetic bearing (axial) t2-ext250m

Read on t2-ext250m p. 8.

compression h2 1500 t2-ext250m

Read on t2-ext250m p. 15.

compression he 2 x 10^4 t2-ext250m

Read on t2-ext250m p. 15.

compression n2 >1 x 10^8 t2-ext250m

Read on t2-ext250m p. 15.

cooling free convection / forced air / water t2-ext250m

Read on t2-ext250m p. 15.

inlet flange DN100CF/DN100ISO-K t2-ext250m

Read on t2-ext250m p. 15.

lubricant oil-free t2-ext250m

Read on t2-ext250m p. 17.

magnetic field max 5 mT t2-ext250m

Read on t2-ext250m p. 12.

mass 11 kg (DN100CF)/8.5 kg (DN100ISO-K) kg t2-ext250m

Read on t2-ext250m p. 15.

mounting orientation any orientation t2-ext250m

Read on t2-ext250m p. 15.

noise level < 50 dBA dBA t2-ext250m

Read on t2-ext250m p. 15.

pumping speed h2 190 l/s t2-ext250m

Read on t2-ext250m p. 15.

pumping speed he 250 l/s t2-ext250m

Read on t2-ext250m p. 15.

pumping speed n2 240 l/s t2-ext250m

Read on t2-ext250m p. 15. Served to the builder as 240 l/s. Export rule: published nitrogen pumping speed.

purge flange NW10 t2-ext250m

Read on t2-ext250m p. 15.

rotation speed 60000 r/min t2-ext250m

Read on t2-ext250m p. 15.

service interval no routine maintenance t2-ext250m

Read on t2-ext250m p. 32.

standby power 15 W t2-ext250m

Read on t2-ext250m p. 15.

startup time 90 s t2-ext250m

Read on t2-ext250m p. 15.

ultimate pressure stated as a bound <5 x 10-9 mbar, <5 x 10-7 Pa mbar t2-ext250m

Read on t2-ext250m p. 15.

venting flange 1/8-inch BSP female t2-ext250m

Read on t2-ext250m p. 15.

TURBOVAC MAG 400 no pumping speed published under any key down to 1.0e-10 mbar +18 parameters

Leybold, tmp maglev. Lifecycle: eol supported.

ambient temp range ≤ 40 °C t2-mag400

Read on t2-mag400 p. 10.

bearing type magnetic t2-mag400

Read on t2-mag400 p. 22.

compression h2 2.5·10^3 t2-mag400

Read on t2-mag400 p. 6.

compression he 6.4·10^4 t2-mag400

Read on t2-mag400 p. 6.

compression n2 > 10^9 t2-mag400

Read on t2-mag400 p. 6.

cooling water t2-mag400

Read on t2-mag400 p. 6.

foreline flange DN 25 KF t2-mag400

Read on t2-mag400 p. 6.

inlet flange DN 100 ISO-K t2-mag400

Read on t2-mag400 p. 6.

magnetic field max ≤ 5 mT t2-mag400

Read on t2-mag400 p. 10.

mass 16 kg t2-mag400

Read on t2-mag400 p. 6.

max foreline pressure 0.8 mbar t2-mag400

Read on t2-mag400 p. 6.

mounting orientation any t2-mag400

Read on t2-mag400 p. 5.

noise level < 70 dB(A) t2-mag400

Read on t2-mag400 p. 10.

purge flange DN 10 KF t2-mag400

Read on t2-mag400 p. 6.

service interval maintenance-free t2-mag400

Read on t2-mag400 p. 25.

startup time 3.5 min t2-mag400

Read on t2-mag400 p. 6.

ultimate pressure stated as a bound < 10^-10 mbar t2-mag400

Read on t2-mag400 p. 6.

venting flange DN 10 KF t2-mag400

Read on t2-mag400 p. 6.

1 model the base carries no usable ultimate pressure for

They are in the corpus and they are named here. What is missing is a published value to judge them on, which is not the same as a model that fails. Not one of them reaches a servable ultimate pressure, and each names its own reason for pumping speed below: a key never printed for it, a printed reading this export cannot turn into one served figure, or a reading this export withholds.

  • STP-A1303 Edwards 0 parameters no pumping speed published under any key
The 22 documents this family reads
  1. ptb-edwards-stp-f2203c Instruction Manual (B) - STP Series Turbomolecular Pumps - STP-F2203 Series - Pump Specific Information (MT-50E-101-A) Edwards https://www.ptb-sales.com/manuals/edwards/stp-f2203c.pdf
  2. ptb-edwards-stp-ix455 Instruction Manual - STP Series Turbomolecular Pumps - STP-iX455/iXL455 Series (MT-64E-002-E) Edwards https://www.ptb-sales.com/manuals/edwards/stp-ix455.pdf
  3. ptb-edwards-stpa1603c Instruction Manual (B) - STP Series Turbomolecular Pumps - STP-A1603 Series - Pump Specific Information (MT-46E-101-A) Edwards https://www.ptb-sales.com/manuals/edwards/stpa1603c.pdf
  4. ptb-leybold-turbovac340 TURBOVAC 340 M / 340 MC / 340 MCT / 341 MCT - Turbomolecular Pumps with Magnetic Bearing - Operating Instructions Leybold Vacuum https://www.ptb-sales.com/manuals/leybold/turbovac340.pdf
  5. ptb-seiko-seiki-stp-h803-1303 Instruction Manual - Seiko Seiki STPH803C/H1303C/H803CI (P033) Turbomolecular Pump System (B717-00-880 Issue E) Seiko Seiki / BOC Edwards https://www.ptb-sales.com/manuals/seiko_seiki/stp-h803-1303.pdf
  6. ptb-seiko-seiki-stp-ixa2205 Instruction Manual - STP Series Turbomolecular Pumps - STP-iXA2205 Series (MT-63E-001-H) Seiko Instruments / Edwards https://www.ptb-sales.com/manuals/seiko_seiki/stp-ixa2205.pdf
  7. ptb-shimadzu-tmp-3203-3403 Magnetically Levitated Turbo Molecular Pump - Model:TMP-3203M (Air cooled type) / TMP-3203MC (Air cooled chemical type) / TMP-3203LM (Wide range type) / TMP-3203LMC (Wide range chemical type) / TMP-3403LMC (Wide range chemical type) - Instruction Manual (263-13236E) Shimadzu https://www.ptb-sales.com/manuals/shimadzu/tmp-3203-3403.pdf
  8. ptb-shimadzu-tmp-403 Magnetically Levitated Turbo Molecular Pump - TMP-203M,TMP-303M,TMP-403M (Air cooled type) / TMP-203MC,TMP-303MC,TMP-403MC (Air cooled chemical type) / TMP-203LM,TMP-303LM,TMP-403LM (Wide range type) / TMP-203LMC,TMP-303LMC,TMP-403LMC (Wide range chemical type) - Instruction Manual (263-13238C) Shimadzu https://www.ptb-sales.com/manuals/shimadzu/tmp-403.pdf
  9. ptb-shimadzu-tmp-803-1303 Magnetically Levitated Turbo Molecular Pump - Model:TMP-803M,TMP-1003M,TMP-1103MP,TMP-1303M (Air cooled type) / TMP-803MC,TMP-1003MC,TMP-1103MPC,TMP-1303MC (Air cooled chemical type) / TMP-803LM,TMP-1003LM,TMP-1103LMP,TMP-1303LM (Wide range type) / TMP-803LMC,TMP-1003LMC,TMP-1103LMPC,TMP-1303LMC (Wide range chemical type) - Instruction Manual (263-13232B) Shimadzu https://www.ptb-sales.com/manuals/shimadzu/tmp-803-1303.pdf
  10. t2-ext250m Edwards https://www.ptb-sales.com/manuals/edwards/ext250m.pdf
  11. t2-mag-w2000 Leybold https://www.ptb-sales.com/manuals/leybold/mag_w2000.pdf
  12. t2-mag-w2010c Leybold https://www.ptb-sales.com/manuals/leybold/mag_w2010c.pdf
  13. t2-mag-w2010cht Leybold https://www.ptb-sales.com/manuals/leybold/mag_w2010cht.pdf
  14. t2-mag1600-2000 Leybold https://www.ptb-sales.com/manuals/leybold/mag1600-2000.pdf
  15. t2-mag400 Leybold https://www.ptb-sales.com/manuals/leybold/mag400.pdf
  16. t2-magdigital Leybold https://www.ptb-sales.com/manuals/leybold/magdigital.pdf
  17. t2-magdigital05141 Leybold https://www.ptb-sales.com/manuals/leybold/magdigital05141.pdf
  18. t2-stp-603-1003 Seiko Seiki (ligne STP) https://www.ptb-sales.com/manuals/seiko_seiki/stp-603-1003.pdf
  19. t2-stp-a2203 Seiko Seiki (ligne STP) https://www.ptb-sales.com/manuals/seiko_seiki/stp-a2203.pdf
  20. t2-stp-a2503-a3003 Seiko Seiki (ligne STP) https://www.ptb-sales.com/manuals/seiko_seiki/stp-a2503_a3003.pdf
  21. t2-stp301-451 Edwards https://www.ptb-sales.com/manuals/edwards/stp301-451.pdf
  22. tf-leybold-mag-w-300-manual Leybold https://nl.shop.leybold.com/medias/17200045-002-Instructions.pdf?context=bWFzdGVyfHJvb3R8NjI3MTYyNXxhcHBsaWNhdGlvbi9wZGZ8YURBekwyZzVOeTgyTnpJek1qUTNORE16TXpJeE5DOHhOekl3TURBME5WOHdNREpmU1c1emRISjFZM1JwYjI1ekxuQmtaZ3wyMmIzNmI3MWRmYjVmYmZlYTQ2MDRjODY4ZDQxMmI0OTQ2YTljMTA3MTI0ZjVjMWE1ZTBmYTliNjY3MGQ3Nzhk&attachment=true