Every material in the wall is a gas source for the life of the machine. This step reads the card, the sourced outgassing rate and the surface state it was measured in.
read read from the base typed entered by hand, outside the base
What already answers this
Each line links a page of this site and says what it carries for this step.
- /matter/ carries one card per material, with grades, process ceiling and cleaning
- /matter/properties/ sorts every material on one parameter at a time
- /tools/outgassing/ serves the sourced rate, its species, its surface state and its pumping time
What does this wall outgas, unbaked and baked?
The switch does not scale a number by a factor: it reads the base again in the other state. A material the base does not carry in the state you ask for is named and taken out of the total, never interpolated.
| Wall | Area cm² | Rate in this state | Species | Uncertainty | Source |
|---|---|---|---|---|---|
| Austenitic stainless 304L / 316L / 316LN ESR | not read yet | ||||
| Oxygen-free copper C10100 / C10200 | not read yet | ||||
| Fused silica and borosilicate (Kodial) | not read yet |
The areas above are orders of magnitude typed to make the example run, and this site measured none of them. Change them to your own and every figure below follows.
The base carries 1 of the 20 materials it covers in all three states, and 19 in only some of them. A material with no reading in the selected state gets an empty row.
Not in the base yet
What this step cannot answer, and why. Every count below is read from the corpus at each build.
- unsourced 60 Matter cards out of 85 carry no entry in the outgassing base. Their cards give grades, expansion and cleaning, and no outgassing rate.
- unsourced 177 published rates in the base carry no usable pumping time. They stay in the base under their key, and no calculator here will read one.
Your machines
kept in this browser, never sent anywhereNothing here yet. Open an archetype, change one thing, and save it here.